Now, after checking that the DVD-ROM drive is connected to the power cable, the Wii U is put back together.
After closing it, the Nintendo Wii U is switched on and then after reaching to the ‘Disc Channel’, the ‘Eject’ button situated on the Nintendo Wii U is pressed 3 times so that the RED LIGHT in the Drivekey is lit up.
There are many methods to do this which depends on the drive or its utilities or the software which is used for burning by you.If you want to see the instructions for burning with DVD R using IMGBURN by changing the book type setting, you can go here.This piece of technology can boot everything you feed it, except some of the Trucha signed discs as Wii U’s system menu stops them from booting.The Drivekey, unlike other chips, identifies the discs very fast and show them up in the Disc Channel menu.Before plugging, the first step needs to be the configuration of your Drivekey for the current region console which is done using the DIP switch.
The switch’s covering of thin plastic is taken out and the correct region is set into it.
Right-click on the SD card drive from My Computer or Windows Explorer and select “Format.” Change the file system option to FAT32, leave the rest of the settings at default, and then click Start.
Do not save the zip files themselves to the SD card, only the contents. Once it is done it will ask you to Push 1 on the Wiimote to continue. This means to open up Bootmii you’ll need to do it through the Homebrew Channel. After it is loaded: The Wii is now jailbroken and modded out.
After booting the game, the Drivekey’s configuration menu is controlled by using the reset button placed on Wii U.
The reset button is pressed again and again quickly to navigate through the options and after one of the option is selected to change, the button is just hold down for few seconds and then, the option’s settings menu can be cycled through.
Wii U Disc Autoboot will self-start automatically any game you have inserted into your console and each and every game need not be launched manually.